Global Tracking Communications
Your Complete GPS Tracking Solutions Provider
Call us toll-free at 1 (866) 320-5810
Validator 2000 for GPS fleet vehicle tracking
The Validator 2000 series is an event-triggered, data-logging Vehicle Location System utilizing a two-way communication module to automatically download data to the base station. With NO MONTHLY SUBSCRIPTION FEES this system is ideally suited to collect detailed data that every fleet manager needs. Each GPS mobile unit can be programmed to record an "event" through a variety of options/triggers (see examples below). The PC based software allows the user to run detailed reports for checking route efficiency, tracking miles driven, or checking up on that "questionable" driver.
Benefits of the Validator 2000
- Verify customer service and deliveries
- Expose unauthorized/excessive use
- Reduce fuel consumption
- Reduce vehicle maintenance costs
- Ease of route planning and project billing
- An employee accountability/risk management tool
- Reduce overtime wages by verifying actual time worked
- No driver intervention required
- No monthly subscription fees
- Low cost
Features of the Validator 2000
- Extensive reporting and mapping: including stop, speed, idle and mileage
- Automatic data download via two-way communication
- Five sensors for monitoring external inputs, such as
- doors
- PTOs
- lights
- switches
- Holds up to 15,500 individual records
- PC-based for total ownership of data
- Comprehensive recording options
- System tampering recognition
- On-screen route playback
Unit Costs
Call us today for a quote: (866) 320-5810
Validator 2000 Specifications
Physical
- Dimensions: 6 x 4.5 x 1.5 in
- Weight: 158.6g (.351 lb)
- Packaging: Extruded aluminum
General
- Standard log capacity: 15,500 positions and events in non-volatile memory
- Input/Output: 5 discrete - 3 A/d
- Power connection: 10 pin automotive/2 pin automotive
Environmental
- Operating humidity: 95% non-condensing
- Operating temperature: -40° to +85° C
Antenna
- Antenna: Combined GPS/900Mhz
- Transmit power: 140 mW
- Transmit frequency: 902 to 928 MHz spread
Power Consumption
- Supply voltage: 12 to 24 VDC
- At rest: 10 mA@12V
- GPS only: 145 mA@12V
- Transmit: 200 mA@12V
System Requirements
| MINIMUM | PREFERRED | |
| Operating system | Windows 98SE, Me, XP | Windows XP Home Edition |
| Monitor size | 17 in | 19 in |
| Resolution | 600 x 800 | 1024 x 768 |
| Processor | 500 Mhz | 1 Ghz+ |
| Memory | 128 Mbytes | 256+ Mbytes |
| Available HD space | 40 Mbytes | 2 Gbytes |
| Available COM port | At least one free | COM 1 |
| Networked | Yes | Stand alone PC |
| Internet Explorer | 6.0+ | 6.0+ |
Features
- Easy access to route data
- Multi-user enabled software
- 5 analog and 2 digital sensors
- Over 20 reports and graphs
- Password-protected software
- Option port for auxiliary hardware
- Unlimited landmarks
- Downloads possible from over a mile away
- User defined log settings
- Address searching and routing
Event Recording Options
Each vehicle GPS unit can be programmed to log a record through any combination of the following options/triggers:
- Time: Set period of time in seconds between each record
- Distance: Set distance in miles between each record
- Speed: Set threshold in MPH to acknowledge a speeding vehicle
- Stops: Set length of time in seconds to acknowledge a vehicle stop
- Accel / Decel: Set threshold to acknowledge a rapid vehicle acceleration or deceleration
- Sensors (up to seven): Record when an installed sensor is activated (i.e. door opening, latch release, boom activated, fork activated, etc.)
- Data: Send data from an external device and record when and where it was collected (i.e. delivery quantity, count of passengers, weight of bin, etc.)
- Engine On/Off: Record when engine is started and shut down
- Geo Fence: Record when vehicle enters/leaves a specified area
